Welcome.
Isn’t it great “generating”
Hot Water Using

Solar Energy

For Residential
Solar Hot Water Systems

CLICK HERE

CLICK HERE
For Commercial
Solar Hot Water Systems
& other Solutions

Overview

So, after reading through the information on our Hot Water Cover Page, you may now have an idea about the types of Solar Hot Water Systems (or Heat Pumps).

QUESTIONS?
No problems at all.
Simply ring us for a quick chat.

The basic steps are:

1. Get a Quote from us
2. Upon your approval, we submit the same quote to Solar VIC (if Solar VIC rebates are included).
3. You sign up on the Solar VIC website and accept the quote via their portal.
4. After receiving approval from Solar VIC, we email you the works contract.
5. Organise the installation and commissioning.

Please advise on the below questions

1. Total number of people that would be using Hot Water on a general basis?
2. Single Storey / Two Storey / or High Rise building?
3. If the existing system needs to be taken off (decommissioned), clear pictures of the tank model and location installed.
4. Are you eligible for the Solar VIC rebates? Link to check eligibility
5. Roof and elevation drawings if it is about a NEW CONSTRUCTION.
6. Full address of the site, email address and phone to contact.
7. Do you prefer to have a Gas or Electric system as a back option?
8. Type of roof? A clear picture of the roof will be helpful.
9. Would you prefer to have a Close Coupled System (where the tank and panels are above the roof) OR would you like to have a ground-mounted tank?

Case Studies on Solar HW System

Warranwood Case Study - Solar Hot Water System

Warranwood – SHW & Wood Stove

Site:
Warranwood, Melbourne, Victoria

Dates:
System Design: May 2011
System Installation: July-August 2011
System Commissioned: August 2011

Project Features:
The system consists of:
– 1 x Rinnai Prestige Mk II 330L Stainless Steel Gas Boost Tank – Titanium.
– 2 x Rinnai Excelsior FTC Premium Copper Solar Collector Panels.
– 1 x Side-Pitch Frame.
– 1 x Sun Ray Tedson Heat Exchanger.
– 1 x Rinnai Solar Infinity 20 External Natural Gas Booster.
– 1 x Nectre Bakers Oven with wetback.

CLICK HERE TO GAIN ACCESS TO THE FULL CASE STUDY

L

Margaret Williams Centre (MWC)

System Components

– FP1, FP2, ET (solar storage tanks): Rinnai Prestige 330L stainless steel solar storage tank, qty 3.
– Flat Plate Collectors: Rinnai Excelsior FTC collectors, qty=4.
– Evacuated Tube Collectors: Apricus 20 tube collector and manifold, qty 2 (40 tubes total).
– Collector Framing: Rinnai galvanised steel framing kits.
 
– Flat Plate Collector Air Bleed Valve (1 on each bank of two collectors): Rinnai manual air bleed valve – to bleed air from system after any works requiring partial or total system drainage.
 
– Gas Boosters: Rinnai Commercial Manifold Pack MP2 comprising two HD200i units, MECs control and co-axial flueing. Any flue condensation drains from the bottom of each flue and empties into the tank safety tray

CLICK HERE TO GAIN ACCESS TO THE FULL CASE STUDY
Guide To buy Solar Hot Water System

Northcote – Solar Hot Water

Site:
Northcote, Melbourne, Victoria
Dates:
– System Design: March 2011
– System Installation: April 2012
– System Commissioned: April 2012
Client:
Private Client
Project Goals:
On viewing the site plans for this project it became obvious that suitable roof places for solar were limited, with the original house having east and west facing spaces. So the goal was to design and install solar hot water and take advantage of the possibilities.
Project Features:
The system consists of:
– 1 x Rinnai Prestige 330L stainless steel storage tank
– 2 x Rinnai Excelsior FTC Premium Copper Solar Collector Panels
– 1 x Rinnai Solar Infinity 26 External Natural Gas Booster
– 1 x On-Demand Circulation Pump

CLICK HERE TO GAIN ACCESS TO THE FULL CASE STUDY

Award Winning Project:
This project won the 2012 Clean Energy Council award for Best Design and Installation of a Solar Hot Water System.

We also carry out CLEAN AND HEALTH CHECKS (C&HC) on Solar Hot Water Systems.

Simply send us an email or call us to book the C&HC.

All our installers are Accredited and Fully Licensed.
Only licenced installers will be used to perform C&HC on your Hot Water System.

Book an appointment

First Name
Last Name
Email
Select Title
Message
The form has been submitted successfully!
There has been some error while submitting the form. Please verify all form fields again.